|
Written by Administrator
|
|
Friday, 01 February 2008 |
|
| Description |
1)Brushless ,self regulated with AVR . 
2)Steel casing ,H insulation ,IP21-23
3)Power from 10.2KVA to 1375KVA/60HZ(8KVA to 1000KVA /50HZ )
4)60HZ ,1800RPM (50HZ 1500rpm as option )
5)SAE standard
6)Color :black ,grey and green as option
7)CE approved
Others :2 pole alternator and 6 pole alternator as your choice .For installed as power track .
Specification :
powered by diesel engines comply SAE standard , widely used in ships, oil fields, trains, telecommunications and high-layer buildings.
1)Regulation accuracy when no load to full load.
AVR 0.5%
External and internal voltage control range: ± 10%
2)Dynamic voltage characteristics
The transient dip in voltage when rated load is placed on the alternator at 0.8 power factor is 20%recovery time is between 0.2 and 1.0 second.
3)Unbalanced load
The alternators permit an unbalanced load of 25% rated current. The deviation of line voltage is less than 5%.
4)construction
The alternators are including main alternator, exciter, excitation system. Brushless and constant voltage are available on product design.
5) Inner part
All windings are made of class H copper wire and class H insulating materials. The standard insulation used a special epoxy resin impregnation process. The insulation system of the windings conforms to the requirements of temperature class H. The insulation is resistant to moisture, oil vapour, contamination and corrosive sea air.
6)Alternator's frame is made of 6mm steel plate. End bracket is made of high strength casting. These result in alternator strong and pleasing to the eye, vibration level derated.
7)AVR with high reliability.
other :Permanent Magnet Generator(PMG) can meet special place leading non-line facility and alternating load.
Main stator windings are 2/3 pitch, eliminating third harmonic neutral |
|
|
|
Last Updated ( Wednesday, 13 February 2008 )
|
Products 
